Influence of CBR Variations on Rigid Pavement Structural Design for Airport Service Roads
Downloads
Rigid pavement on airport service roads is essential for smooth vehicle operations, with subgrade conditions being the primary factor in determining concrete slab thickness. Variations in the California Bearing Ratio (CBR) of the subgrade commonly affect pavement thickness and construction costs. This study analyzes how changes in subgrade CBR impact rigid pavement thickness for service roads using the empirical method of Pd T-14-2003. It also compares the results with international standards, including FAA AC 150/5320-6G and ICAO Annex 14, to validate findings and assess the relevance of Indonesian standards globally. The research involved collecting traffic data and geotechnical parameters and calculating design thickness variations based on CBR values. Results indicate that each 1% increase in CBR decreases the required concrete slab thickness by 4 mm: 163 mm at 6% CBR, 158 mm at 7%, and 155 mm at 8%. Comparison with international standards shows that Pd T-14-2003 tends to produce conservative designs. However, integrating mechanistic-empirical approaches could improve safety and economic efficiency. These findings demonstrate that enhancing subgrade quality can reduce slab thickness, leading to material savings and lower construction costs. This study advances the traditional CBR approach by incorporating advanced soil mechanics principles and offers a framework for adopting international best practices in Indonesian airport pavement design, supporting the advancement of domestic aviation infrastructure.
Agunwamba, J. C., & Tiza, M. T. (2023). An appraisal of mechanistic-empirical models (MEMs) in pavement deterioration. Journal of Nature, 2, 6855.
Ahmed, F., Thompson, J., Kim, D., Huynh, N., & Carroll, E. (2023). Evaluation of pavement service life using AASHTO 1972 and mechanistic-empirical pavement design guides. International Journal of Transportation Science and Technology, 12(1), 46–61. https://doi.org/10.1016/j.ijtst.2021.11.004
Al-Qaili, A. H., Al-Mansour, A. I., Al-Solieman, H., & AlSharabi, K. (2024). RNN-based pavement moduli prediction for flexible pavement design enhancement. Case Studies in Construction Materials, 20, e02811. https://doi.org/10.1016/j.cscm.2023.e02811
Amakye, S. Y. O., Abbey, S. J., Booth, C. A., & Oti, J. (2022). Road pavement thickness and construction depth optimization using treated and untreated artificially-synthesized expansive road subgrade materials with varying plasticity index. Materials, 15(8), 2773. https://doi.org/10.3390/ma15082773
Bahurudeen, A., Kanraj, D., Gokul Dev, V., & Santhanam, M. (2015). Performance evaluation of sugarcane bagasse ash blended cement in concrete. Cement and Concrete Composites, 59, 77–88. https://doi.org/10.1016/j.cemconcomp.2015.03.004
Caecarma, G. A. A., Munawir, A., & Soehardjono, A. (2025). Cost efficiency of variations in CBR of subgrade to deflection in rigid pavement. IOP Conference Series: Earth and Environmental Science, 1488(1), 012081. https://doi.org/10.1088/1755-1315/1488/1/012081
de Moura, I. R., dos Santos Silva, F. J., Costa, L. H. G., Neto, E. D., & Viana, H. R. G. (2021). Airport pavement evaluation systems for maintenance strategies development: A systematic literature review. International Journal of Pavement Research and Technology, 14(6), 676–687.
Elbosraty, A. H., Bahr, M., & Ebid, A. M. (2025). Cost optimization for flexible pavement on fine sand improved using palm fibers. Scientific Reports, 15(1), 17454. https://doi.org/10.1038/s41598-025-02115-7
FAA. (2021). AC 150/5320-6G - Airport pavement design and evaluation. Federal Aviation Administration.
Ghosh, A., Ransinchung, G. D. R. N., & Kumar, P. (2024). Influence of key parameters on the performance of RAP-inclusive geopolymer concrete pavements: An approach integrating sensitivity analysis. Construction and Building Materials, 414, 134705. https://doi.org/10.1016/j.conbuildmat.2023.134705
Hazirbaba, K. (2018). Large-scale direct shear and CBR performance of geofibre-reinforced sand. Road Materials and Pavement Design, 19(6), 1350–1371.
ICAO. (2018). Annex 14 to the Convention on International Civil Aviation - Aerodromes (8th ed.). International Civil Aviation Organization.
Koh, Y., Lu, Y., Wiggins, R., Kim, Y., Qamhia, I. I. A., Tutumluer, E., Tingle, J., Parsons, T., & Harrell, M. J. (2025). Performance prediction models for flexible and rigid pavements—State-of-the-practice review for implementation in North America. International Journal of Pavement Engineering, 26(1). https://doi.org/10.1080/10298436.2025.2513454
Kollaros, G., & Athanasopoulou, A. (2017). Influence of drainage on flexible road pavement design. Research on Engineering Structures and Materials. https://doi.org/10.17515/resm2016.76ma0726
Kwon, J., Seo, Y., & Kaplan, A. (2024). Assessment of full-depth reclamation (FDR) pavement performance: A case study in Georgia. Case Studies in Construction Materials, 20, e02910. https://doi.org/10.1016/j.cscm.2024.e02910
Matajinimvar, S., Choobbasti, A. J., & Kutanaei, S. S. (2025). The effect of construction moisture content on the mechanical, shear and environmental characteristics of clay stabilized with cement and CS: A micro and macro study. Case Studies in Construction Materials, 22, e04818.
Otieno, M. (2024). Validating the empirical distress prediction models within the AASHTOWare Pavement Mechanistic-Empirical Design, using Tennessee pavement performance data from the Long Term Pavement Performance database.
Putra, A. R. D., & Yasruddin. (2021). Planning evaluation of rigid pavement's thickness on intersection of a road segment of Sikui Km. 34 national road Sta. 0+000 S/D 0+300 East Barito District. CERUCUK Journal, 5(1), 1–12.
Shallal, M., & Ahmed, E. S. (2019). A comparison between the empirical and mechanistic-empirical pavement design methods. International Journal of Scientific Research and Management, 7(07). https://doi.org/10.18535/ijsrm/v7i7.ec01
Sun, J., Oh, E., Chai, G., Ma, Z., Ong, D. E. L., & Bell, P. (2024). A systematic review of structural design methods and nondestructive tests for airport pavements. Construction and Building Materials, 411, 134543. https://doi.org/10.1016/j.conbuildmat.2023.134543
White, G. (2021). Comparing the cost of rigid and flexible aircraft pavements using a parametric whole of life cost analysis. Infrastructures, 6(8), 117. https://doi.org/10.3390/infrastructures6080117
Copyright (c) 2025 I Putu Chandra Wibawa, I Made Agus Ariawan, Made Dodiek Ardana

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International. that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.


